Nepean Rubber and Plastics
Rigga Rubber

Self Cleaning Chute Liners

Skirting Rubber

Skirting rubber is a general purpose rubber used mainly in the mining industry as a side skirt on conveyor belt systems. It is available in full width slabs up to 1500mm wide and also pre-cut skirting strips.

Nepean Rubber stock both skirting rubber slabs and also a full range of pre-cut rubber skirting strips in a variety of different rubber compounds and thicknesses.

Select a product type from the list below to see more details and a full range of sizes available.

  • Natural Skirting Rubber (65 Duro)
  • Soft Skirting Rubber (40 Duro)
  • FRAS Skirting Rubber
  • Neoprene Skirting Rubber

If you have any questions regarding these products or require advice on choosing the right product for your application please contact us.

 

Natural Skirting Rubber 65 Duro is a black natural rubber designed for use as a conveyor skirting or similar application.

Stocked Sizes

Note: Skirting rubber can also be supplied in shorter lengths and can be cut to custom width strips as required.

Soft Skirting Rubber (40 Duro) is a black natural rubber designed for use as a conveyor skirting or similar application. Used commonly when a softer, more flexible skirt is required. Soft skirting has excellent tensile and elongation properties.

Stocked Sizes

Note: Skirting rubber can also be supplied in shorter lengths and can be cut to custom width strips as required.

 

FRAS Skirting Rubber is a neoprene rubber specially formulated to be Fire Resistant Anti-Static, designed for use as a conveyor skirt in applications where ignition points are a safety issue, such as underground coal mines etc.

Stocked Sizes

Note: Skirting rubber can also be supplied in shorter lengths and can be cut to custom width strips as required.

 

Neoprene Skirting Rubber is a black chloroprene rubber with good weathering and heat resistance. Has moderate resistance to petroleum based fluids.

Stocked Sizes

Note: Skirting rubber can also be supplied in shorter lengths and can be cut to custom width strips as required.

 

Inflatable Liners

In areas of high moisture contact and sticky clay type soil material build up and clogging of chutes can cause severe disruption to    normal downstream processes.

Nepean Rubber can engineer Inflatable linier solutions   use purpose designed features utilizing flexible PLC controls to optimize the operation of the liners to the unique demands of the application.

Cost effective when installed in areas in which there is severe buildup as a result of high moisture content in the material. These systems consist of custom-fit rubber liners that inflate and deflate with low-pressure air supplied through a user friendly Nepean control box and low-pressure plant air. The timed action keeps the liners clean and the chute free from buildup. These systems provide extensive periods of maintenance-free service in areas which were previously high maintenance

These liners can be in tailor made modules and are fixed by means of M20 welded studs.

 

Standard Moulded Rubber Liners

Content goes here...

Copyright © Nepean Rubber and Mouldings Pty. Ltd.